Chat with us, powered by LiveChat

Forklift Safety Elements – Know About Load Basics

OSHA advises operators to check loads before picking them up with the forks, ensuring the load’s stability and dimensions will allow for safe transport. Move squarely in front of the load and move the forks apart as far as possible before driving them under the load. Make sure to not overload and that the load is centered.

Slightly tilt the forklift mast backward before lifting. Lift the load enough to clear the floor or rack. For stacking, OSHA recommends lifting the load above the lower stack by about 10 centimeters, or 4 inches.

When placing a load, operators should be squarely in front of the placement destination.  Make sure the area is flat and stable, and don’t place heavy loads on top of light ones. Lower the forks upon placing the load, and then back the forklift away. As always, ensure the load is stable.

 

Call Now to speak with a Green Guard Safety Training Specialist

Click Here for Workplace Safety Training Courses

Click Here for WebChat

 

If you liked this post be sure to follow us:

linkedin Follow us    facebook Like us

 

Source:https://www.safetyandhealthmagazine.com/articles/16138-elements-of-forklift-safety